|Minimum Order Quantity
|Surface of Application
SPEB-7 Multi Purpose synthetic adhesive has high cohesive strength at room and elevated temperature.
• Upholstery. ( Chair / Sofa Manufacturing)
• Bus Body ( Vinyl To Plywood / Hat-rack / And Other Areas)
• Pvc Flooring
• Carpet Flooring
• Automobile Industry
• Refrigeration Industry.
• Switch gear Industry
• Leather Works
• Domestic Application
• Handicraft IndustryApplications
SPEB-7 MULTI PURPOSE synthetic solvent-based adhesive is suitable for bonding various materials: rexine to leather, rexine to foam, foam to foam, foam to wood, rubber to metal, rubber to rubber, rubber to canvas, rubber o rexine, leather to metal, leather to rubber, leather to PVC, leather to canvas, leather to leather, rexine to cardboard, rexine to canvas, cork to rubber, cork to leather, cork to metal as well as PVC floor tiles and carpet.Method of Use
Ensure that the surface to be bonded is clean and dry. Clean the surface thoroughly to remove any dirt, grease etc. Then apply the adhesive on both surfaces evenly and allow drying for 5-10 mins or until just “dry to touch”. Now join both surfaces and press well for about 6-8 hours to get a strong and perfect bond. Care should be taken to avoid trapping of air during joining. Note :
Workable bond strength of the joint will be achieved after sometime, but maximum strength will occur only after the solvent has completely evaporated, this takes between 12-24 hours depending on the porosity of the surface.
SPEB-7 MULTI PURPOSE should be stirred well before use. The lid of the container must be tightly closed after use and should be kept away from heat and direct sunlight.